//
you're reading...
Left Wing Skinning

priming for primer

Trying to get some odds and ends wrapped up so I can dimple the bottom skin and get it primed.  I also have all of the inspection hole parts, filler neck backers, tank straps…etc to get primed while I have the paint gun out.

Installed the nutplates on the center rib at the bellcrank.  This inspection hole is a bit different from the others as it spans a center rib.

 

Marked the bottom skin to be able to cut out the ole for the aux tank.

got the nutplate holes on the outboard edge of the main tank bay all countersunk.

Discussion

Comments are closed.