//
you're reading...
Right Wing Assembly

marking the attach angles

Marked the rib attach angles on the main and rear spar for drilling.  I marked a line .19 from the edge of the angle to ensure proper edge distance for the 3/32 rivets then eyballed the other marks.  I am trying to be more effcient with my time on this wing, ie. the rivet holes need not be exact in this application…..so mark them and go.  

 

 

I plan to do more work on the bench before jigging up this wing.  I marked the mounting holes for the strut attach steel fittings.  I also removed the portion of the attach angle at the spar web splice to allow the strut attach steel to clear.  When I riveted the angle on I wrongly assumed the steel laid across the angle.

 

Discussion

Comments are closed.